Results 1 to 8 of 8

  1. Reilsss is offline That one gold Dragon
    Location: Germany
    Posts: 649

    #1

    Default Export with 0kb and wrong matierals; Solution founded

    Hi,
    I thougth I try myself in modding two cars by adding each a spoiler.
    But so far I run into two diffrent problems. For each car a other problem.

    For the Koenisegg CCR I was more lucky and could export the car again.
    But unforently a few materials (example the wipper) appear in a straing pink. I guess tdu finds not the correct texture or the material for this object is not correct. But I do me a very hard time to locate the material that is wrong. specialy because in ZMod2 it looks normal not messed up.

    So do somebody know a hide or tip how I can locate the material names of some poligons in ZMod2 ?



    For the McLaren F1 GT I have a other problem, tool know about it, the car can't be exported.
    I fixed so far all Material related warrings and the export gives no warrings anymore when it exports. but the file unforently remains by 0 kb size. So something is wrong but I have no cule where to start seeking sinces there no errors shown anymore.
    I think Djey had onces a familar problem with his Alfa GT Roadster ??


    And for case of wonder yes I made a search path to the common car textures. So they are not missed.
    Last edited by Reilsss; 03/11/08 at 23:00 PM.


  2. Reilsss is offline That one gold Dragon
    Location: Germany
    Posts: 649

    #2

    Default

    I found a solution to th export problem:
    You have to put all Textures into the Serives Texture path.
    The Common_car as well as the car itself.
    Only then it works with the export on any car without any problem like GML setted wrong or anything.

  3. Djey is offline Car Aficianado
      
    Location: Near a place called 'Pont des Arts'
    Posts: 2,266

    #3

    Default

    Yes, that was my first issue when exporting the Alfa GT.

    I also noticed the model must be fully textured without errors, before saving the z3d file for the first time.
    To do that, texture paths must be correctly set onto the empty project before importing the first 3DG

    Concerning problem with Gallardo SE, I suggest to work on this with Oleg. I'm pretty sure this is a bug with the export filter (I already told Tool to do this).
    Give life back to TDU: #TDUForever
    Projects: TDUF | TDUMT | Community Patch 2.00A
    Buy me a beer (donate)

  4. Racers Hardware is offline ...powered by
    Location: Germany
    Posts: 107

    #4

    Default

    i had the same problems with the model export. now i mounted all map folder to the services texture path and it works halfway ok.

    but with some textures i have trouble. every time i got an purple interior. and i dont know why.


    other question.
    how can i put lower my car? i change the position of my car in z-axis, no change ingame. i modify the postion of wheel assy in z-axis, no change ingame. but when i change the position of the wheel assy in x or y-axis the wheel position ingame change. why not in z axis? whats the gimmick?

  5. dc300m02 is offline Hot Hatch
    Location: Pittsbugh, PA
    Posts: 179

    #5

    Default

    x axis = left/right
    y axis = up/down
    z axis = front/back

    to lower the car, you must move everything by the y axis except for the 4 wheel/tire/brake objects.
    Hello, my name is Jason and I'm addicted to modding.

  6. Racers Hardware is offline ...powered by
    Location: Germany
    Posts: 107

    #6

    Default

    Quote Originally Posted by dc300m02 »
    x axis = left/right
    y axis = up/down
    z axis = front/back

    to lower the car, you must move everything by the y axis except for the 4 wheel/tire/brake objects.

    i did it. but nothing changes. so, where the trick? when i move in x and z position i see a change ingame. in y position not.

  7. Djey is offline Car Aficianado
      
    Location: Near a place called 'Pont des Arts'
    Posts: 2,266

    #7

    Default

    When eruanno wanted to lower its TT, he has moved the S_PLANE mesh up... and apparently it works.
    Give life back to TDU: #TDUForever
    Projects: TDUF | TDUMT | Community Patch 2.00A
    Buy me a beer (donate)

  8. Racers Hardware is offline ...powered by
    Location: Germany
    Posts: 107

    #8

    Default

    now i figured out how it works. i unlink all necessary stuff of a car and move them then. linking back and my car is lower in the game.
    thx for help...


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

about us

  • turboduck is a community that is dedicated to driving and racing games of all types on all platforms. Whether it's ticking off the miles/kilometres while exploring an open world, crashing and exploding everything in an insane balls-to-the-wall arcade racer, or nailing down every apex and trimming off every tenth possible in authentic sim-racing. It's all up for discussion as we enjoy the virtual cars, bikes, and everything else that these games offer. So join us, jump into the discussions, and don't think too much about why a 'duck' is our mascot. ;)
turboduck twitter turboduck facebook turboduck youtube turboduck twitter turboduck rss