Results 1 to 7 of 7

  1. Camel is offline Legendary Classic
    Posts: 11,501


    Default Bleed your brakes like a boss

    Tried bleeding my brakes using the one man gravity method where you just crack the bleeder nipple open and let the fluid slowly drain out. Usually works flawlessly but this time my pedal was spongier than a sponge.

    Then I had a thought, which was painful when I was washing my hands. Wonder if the liquid soap dispenser would be suitable to create a vacuum to pull the brake fluid through the system. So I took it out of the soap and put it into one end of some clear 5mm tubing and put my thumb over the end of the tube and pressed the dispenser. By gosh, it created a vacuum and tried to pull my thumb into the hole with no air leaks anywhere!

    Tried it on the car but it didn't go so well sadly. But because the dispenser has a one way valve in it, you can press the brake pedal and fluid will come out of the dispenser, but air will not go back in.

    1. Get some clear PVC tubing (fish tank tube/washer jet tube)
    2. Cut it into 4 pieces and place one piece over each bleed nipple (hold the end in boiling water to soften it so it's stretchy before placing it on the bleeder, it will go on easy then try to shrink to it's original size once on the bleeder when it cools down creating a good seal)
    3. Place the soap dispenser in the other side of the tube on the brake you're going to bleed (check vehicle manual for the correct bleed sequence)
    4. Open the bleeder slightly, just enough for the fluid to come out. (only slightly so air doesn't get into the caliper past the thread)
    5. Take the brake fluid cap off and ensure it's topped up throughout so you don't pull more air into the system
    6. Pump the pedal repeatedly, slowly
    7. When the fluid in the tube has no bubbles in it, close the bleeder and move the soap dispenser to the next tube/wheel
    8. By using 4 tubes you can then go around all the wheels again quickly without having to play with your nipples again.

    No more moaning assistant saying that their leg aches pressing the pedal for you or pints owed to any mates. From now on, bleeding brakes will only take 5 minutes for me to do.

    I amaze even myself sometimes. Hopefully this helps somebody out.

  2. calster17 is offline Resident rubbish car fan.
    Location: Aberdeen, SCO, UK
    Posts: 3,280



    Last time I bled the brakes on a car was the MR2 well over 6 years ago! Really just pneumatic brakes at work...

    Thats actually an epic idea though!

    Quote Originally Posted by Camel »
    8. By using 4 tubes you can then go around all the wheels again quickly without having to play with your nipples again.
    Speak for yourself...
    Quote Originally Posted by Calster17
    I did a 1100 mile round trip to get drunk and push cars out of a muddy field, 10/10 would do again
    Tumblr ~ Blown Turbos
    Do follow

  3. TIMELESS is offline Moderator
    Location: Northern Ireland, UK
    Posts: 4,871



    Heh, nipple.

    No but seriously that was some impressively resourceful thinking.

    Naturally Hans is wet, he’s standing under a waterfall.

  4. Andreas¹ is offline Crazy Duck
    Location: Jönköping, Sweden
    Posts: 7,385



    You had me at "What's spongier than a sponge? A Camel's brakes."

  5. Ryzza5 is offline .
    Location: .
    Posts: 15,936



    Or just buy a syringe from the hardware store

  6. Camel is offline Legendary Classic
    Posts: 11,501



    And do what with it? Make a vacuum, which didn't work for me even when using 5mm internal diameter tubing on an 8mm bleeder head. It pulled brake fluid from the caliper and also air from outside of the caliper so I ended up with more air in the caliper than I started with.

    I also didn't need to go anywhere to get anything for this or buy anything.

  7. GTAMADDOG is offline Dreaming in Splendour
    Location: Twinned with Bréhal, Normandy.
    Posts: 2,335



    I just used the bodge-job way (naturally) when I did mine. A tube which was a tight fit over the bleed valve, a jar with some brake fluid in the bottom and the other end of the tube in that and then a bit of cooperation with someone else operating the brake pedal and wazza wazza bling bling any air goes into the fluid in the bottle and then rises and escapes. Worked well for me, but I like this idea so I might try it next time..



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

about us

  • turboduck is a community all about driving and racing games. Whether you love to tick off the miles/kilometres in your favourite open-world driving game, crash and explode everything in your balls to the wall arcade racer or nail down every apex and trim every tenth possible in a racing-sim. We don't care as we are just like you and enjoy our virtual cockpits of the cars, bikes and everything else that these games offer. So sit back, relax and don't think too much about why a 'duck' is our mascot. ;)
turboduck twitter turboduck facebook turboduck youtube turboduck twitter turboduck rss